Kent is one of the leader companies in the design and fabrication of demolition and construction tools, with more than 35 years in the market.

Kent is part of the Furukawa Co. Ltd. Group, that is one of the 250 most important companies in the world. Started its operations in the mining area between 1875 and has now diversified its activities in the fabrication and design of hydraulic and pneumatic hammers, drills, concrete demolishers, compactors, pedestal units and other hydraulic and pneumatic tools.

MAQCEN, besides offering the extensive Kent tools line, offers you a workshop with specialized technicians and a stock of spare parts, to give the best support.

Kent is a member of the Construction Industry Manufacturers Association, which is in charge of certifying that the Kent tools comply with the specified ratings.

 

 Hydraulic Hammers

The series F of KENT hammers incorporate a patented system, which prevents the entrance of dust, it's back head pressure increases it's power by 20%.
 
A) Hydraulic hammers class 150-2,000 pounds

martillos1.jpg (18792 bytes)

 
The F series hammers are designed to be used on mini excavators, excavators, skid steers and backhoes. They are ideal for concrete demolition, road repair and preparation.

MAQCEN offers different models depending on your machine capacity.
 

Specifications

KF3ss

KF3Qt

KF4

KF4ss

KF4Qt

KF-6

KF-6Qt

KF-9

KF-9Qt

Impact Energy (ft/lbs)

162

162

192.1

192.1

192.1

475.9

475.9

754.8

754.8

Weight,  lb.

595

450

445

645

575

750

792

1,075

1,188

Weight,  kg.

270

204

202

293

261

341

360

490

540

Blows per minute

1,200

1,200

1,000

1,000

1,000

650 ~ 1,500

650 ~ 1,500

900

900

Operating Pressure, PSI

1,425 ~ 2,000

1,425 ~ 2,000

1,425 ~ 2,000

1,425 ~ 2,000

1,425 ~ 2,000

1,400 ~ 2,250

1,400 ~ 2,250

1,700 ~ 2,150

1,700 ~ 2,150

Operating Pressure, kg./cm²

100 ~ 140

100 ~ 140

100 ~ 140

100 ~ 140

100 ~ 140

100 ~ 160

100 ~ 160

120 ~ 150

120 ~ 150

Working steel Dia (mm)

52

52

60

60

60

76.2

76.2

90

90

Recommended Carrier Weight in tons.

2.00 ~ 3.75

2.00 ~ 3.75

3.25 ~ 5.50

3.25 ~ 5.50

3.25 ~ 5.50

5.5 ~ 7.75

5.5 ~ 7.75

7 ~ 11

7 ~ 11

 

B) Hydraulic hammers class 2,000-10,000 pounds
 

 

martillos2.jpg (22460 bytes)
 
These hydraulic  hammers are designed  to work with crawler excavators. Covering your needs, thanks to its size and design, class and breaking power. resulting on a great efficiency and reduced working weight.
 

 

Specifications

KF-12

KF-12Qt

KF-22

KF-22Qt

KF-35

KF-35Qt

KF-45

KF-45Qt

 Impact Energy, ft. lb.

1051.5

1051.5

2537.6

2537.6

2731.8

2731.8

4023.7

4023.7

Weight,  lb.

100

100

3,800

3,812

4,710

5,328

6,400

7,507

Weight,  kg.

1090

932

1727

1729

2141

2417

2910

3405

Blows per minute

450 ~ 900

450 ~ 900

360 ~ 700

360 ~ 700

320 ~ 600

320 ~ 600

300 ~ 500

300 ~ 500

Operating Pressure (PSI)

2,275 ~ 2,560

2,275 ~ 2,560

2,275 ~ 2,560

2,275 ~ 2,560

2,275 ~ 2,560

2,275 ~ 2,560

2,275 ~ 2,560

2,275 ~ 2,560

Operating Pressure (kg/cm2)

160 ~ 180

160 ~ 180

160 ~ 180

160 ~ 180

160 ~ 180

160 ~ 180

160 ~ 180

160 ~ 180

Working steel Dia. (mm.)

105

105

135

135

150

150

165

165

Recommended Carrier Weight in tons

10 ~ 16

10 ~ 16

20 ~ 27

20 ~ 27

27 ~ 36

27 ~ 36

36 ~ 46

36 ~ 46

 

 

 Neumatic Hammers
 
The KENT pneumatic tools have an automatic start and stop to protect the machine you have it on and the compressor, resulting in a higher productivity and a decrease up to 75% of unproductive time compared to other manufacturers models.

They are designed to give a maximum impact and achievement with a minimum use of air. The shock absorber reduces the impact strength of the pistons, reducing the wear of the critical parts of the hammer.

MAQCEN, besides offering you the best pneumatic hammers we give you the support and service you need for the maintenance to keep it working.

 

martillos3.jpg (14203 bytes)

 

 

 Hydraulic Compactors
 
This Kent tools line combines a vibration of high frequency with a spur of low pressure to realize any compaction job faster.

We offer the plaque and wheel models, depending on the site to be compacted. The model and capacity depends on the machine where the compactor will be installed, mini excavator, backhoe and excavators.

 

martillos4.jpg (12813 bytes)

 

Specifications

KF-12

KF-12Qt

KF-22

KF-22Qt

KF-35

KF-35Qt

KF-45

KF-45Qt

Impact Energy (ft/lbs.)
 

1051.5

1051.5

2537.6

2537.6

2731.8

2731.8

4023.7

4023.7

Weight (lb.)

100

100

3,800

3,812

4,710

5,328

6,400

7,507

Weight (kg.)

1090

932

1727

1729

2141

2417

2910

3405

Blows per minute

450 ~ 900

450 ~ 900

360 ~ 700

360 ~ 700

320 ~ 600

320 ~ 600

300 ~ 500

300 ~ 500

Operating Pressure (PSI)

2,275 ~ 2,560

2,275 ~ 2,560

2,275 ~ 2,560

2,275 ~ 2,560

2,275 ~ 2,560

2,275 ~ 2,560

2,275 ~ 2,560

2,275 ~ 2,560

Operating Pressure (kg/cm2)

160 ~ 180

160 ~ 180

160 ~ 180

160 ~ 180

160 ~ 180

160 ~ 180

160 ~ 180

160 ~ 180

Working steel Dia. (mm.)

105

105

135

135

150

150

165

165

Recommended Carrier Weight in tons.

10 ~ 16

10 ~ 16

20 ~ 27

20 ~ 27

27 ~ 36

27 ~ 36

36 ~ 46

36 ~ 46

 

[who we are] [Construction Equipment] [Industrial Equipmentl] [Used Equipments]
[Machine and Fork Lift Rentals] [Spare Parts and Service] [Contact Us] [Home]

MAQCEN, S.A. DE C.V.
 
José María Chávez 2302
Cd. Industrial, Aguascalientes, Ags. México.
Tel/Fax: (449) 917-8820

Tel/Fax SIN COSTO: 01-800-3-MAQCEN (01-800-3-620236)
 

E-mail: maqcen@maqcen.com

 

 

MAQCEN DE ZACATECAS, S.A. DE C.V.

 

Calz. J. Jesús Reyes Heroles 309

Fracc. La Isabélica

Zacatecas, Zac. 98099

Tel: (492) 899-7802

Tel/Fax SIN COSTO: 01-800-3-MAQCEN (01-800-3-620236)   
 

E-mail: maqcen@maqcen.com